Generators
20 kW – 4 MW · Diesel · Gas · Bi-fuel
- Standby & prime power gensets
- Paralleling switchgear & ATS
- Sound-attenuated enclosures
- Sub-base & belly fuel tanks
- Load bank testing & commissioning
SYSTEM ONLINE
Trusted by 240+ industrial operators
Mission-critical
power & thermal
infrastructure, delivered.
SPM engineers, supplies and services generators, transformers and HVAC systems for data centers, hospitals, utilities and heavy industry — with lead times measured in weeks, not quarters.
0
Units deployed
0
On-time delivery
0
Field service
0
States served
// Authorized distributor & service partner
CUMMINS
CATERPILLAR
KOHLER
GENERAC
ABB
SIEMENS
EATON
SCHNEIDER
DAIKIN
TRANE
CARRIER
YORK
CUMMINS
CATERPILLAR
KOHLER
GENERAC
ABB
SIEMENS
EATON
SCHNEIDER
DAIKIN
TRANE
CARRIER
YORK
LIVE · DATA CENTER DESIGN TOOL
Design your data center power & cooling. In under 5 minutes.
Enter your IT load, PUE, rack density, Tier rating and redundancy. Get a full equipment breakdown — generators, transformers, UPS, PDUs, chillers and CRAH units — sized from 100 kW edge cabinets up to 5 GW AI mega-campuses.
- ✓ 100 kW → 5 GW range
- ✓ Tier I–IV sizing rules
- ✓ Power-block campus mode
- ✓ AI rack densities (up to 130 kW)
Launch configurator
~ 5 min · rough estimate only
OUR INNOVATION
// CASE STUDY 01
Fuel cell + absorption chiller. 85% combined efficiency.
Traditional power generation throws away most of its fuel as waste heat. Our trigeneration system captures it — a solid-oxide fuel cell generates electricity at 60% efficiency, then its 500°C exhaust drives a lithium-bromide absorption chiller for cooling instead of being vented to atmosphere.
85%
Combined
system efficiency
system efficiency
2.4×
Vs grid power +
electric chiller
electric chiller
−62%
CO₂ emissions
per kWh delivered
per kWh delivered
FIG.01 — TRIGENERATION FLOW
SYSTEM EFFICIENCY · SIDE-BY-SIDE
60% electric
25% heat recovery
+50 pts efficiency gain
01 — Product lines
Three core categories.
Three core categories.
Engineered to spec, in stock or built to order.
From 20 kW standby gensets to 50 MVA substation transformers and 1,000-ton chiller plants — one supplier, one project manager, one warranty.
Transformers
15 kVA – 50 MVA · Pad · Pole · Substation
- Dry-type & liquid-filled distribution
- Padmount, polemount, station-class
- Medium-voltage switchgear packages
- DOE 2016 efficiency compliance
- Fast-track 6–12 week builds
HVAC Systems
5 – 1,500 tons · Chillers · RTUs · VRF
- Air- & water-cooled chillers
- Rooftop units & air handlers
- VRF/VRV multi-zone systems
- Precision cooling for data halls
- BACnet/Modbus controls integration
02 — Capabilities
Not just a parts catalog.
Not just a parts catalog.
A full lifecycle partner.
01
Engineering & sizing
In-house PEs run load studies, short-circuit and coordination analysis, and arc-flash modeling so the spec lands right the first time.
02
Procurement & logistics
Direct OEM allocations and three regional staging yards. We expedite, crate, and dispatch — including over-dimensional permits.
03 — Industries
Built for the operators
Built for the operators
who can't afford downtime.
Data centers
N+1 to 2N redundancy. Concurrent maintainability. Sub-cycle ATS.
→Healthcare
NFPA 110 Level 1. Essential, equipment & life-safety branches.
→Utilities
Substation transformers, mobile subs, distribution rebuilds.
→Manufacturing
Process cooling, prime power, peak-shave gensets.
→Oil & gas
Class I Div 2 rated packages. Gas & bi-fuel gensets.
→Government & defense
BAA/TAA compliant. Sec. 889 vetted supply chain. GSA schedule.
→
04 — Selected projects
A few we're proud of.
Supplied (7) 2 MW Cummins QSK60 generators in 2N configuration with paralleling switchgear and 24,000 gallons of belly-tank fuel storage. Commissioned in 11 weeks against a 16-week budget.
14 MWStandby capacity
2NRedundancy
11 wkSite to commission
NFPA 110 compliant essential power system upgrade — 3× 1.5 MW gensets, dual 2,000 A ATS, and full-load testing during a live-facility cutover with zero patient impact.
Two 25 MVA station-class transformers delivered on accelerated 14-week build, with full protective relay packages and SCADA integration.
SPM turned what should have been a 9-month transformer lead-time into 14 weeks, and had crews on site the day it landed. They're the only supplier we trust for fast-track work now.
06 — Request a quote
Tell us what you need.
Tell us what you need.
We'll respond in 24 hours.
Real engineers, not a form-routing bot. Send us a one-line, a single-line diagram, or a full spec package — we'll come back with sizing, pricing and lead time.
-
SALES+1 (203) 715-2728
-
HQ4801 Industrial Pkwy, Houston TX